WATER QUALITY

Our SimuCare system Monitor & control water PH, ORP conductivity, & temperature, with additional air humidity, CO2, PO2, CO2, NH3 and temperature using factory pre-calibrated sensors

SimuCare Sensor-Hub

For up to 3 sensor modules

Sensor hub for equipped with sensor modules with contactless power supply and data connection. With multi path communication control function in case of interruption of the radio link.

Simucare sensor hub is wirelessly connected to local BLE meshed network; being IoT enabled and configurable via SLS Technology Admin (web) and SLS Technology Assistant (app); Measurement data is automatically visualized in SLS Technology Surf (web); Situation notification via SLS Technology Assistant app enables Mobile & Tablet for iOS/Android.

Dimension (L,W,D): 270 x 275 x 45mm
Power: 5V DC, power adapter included.

Integrated temperature sensor

4 measurement and 8 control channels

Download PDF

SimuCare Sensor-Hub

With 4 sensors: TEMP,PH,EC and ORP

Sensor hub with 3 interchangeable sensor modules for measurement and local control of water quality values; with contactless power supply and data connection.

Measuring range:

Temperature: 0-50°C, resolution 0.1°.
PH: 0 - 14 pH, resolution 0.1. pH EC: 0 - 10 mS/cm, resolution 0.1 mS/cm
ORP/Redox: +/- 999 mV, resolution 1mV

Adaptable for fresh and salt water.
Dimension (L,W,D): 270 x 275 x 45mm
Power: 5V DC, incl. power adapter

Each sensor is wirelessly connected to local BLE-meshed network; IoT-enabled and configurable via SLS Technology Admin (web) and SLS Technology Assistant (app); measurement data is automatically visualized in SLS Technology Surf (web); situational flagging via SLS Technology Assistant app (mobile & tablet for iOS/Android) is possible.

Download PDF

SimuCare Sensor-Hub

With 4 sensors: TEMP,PO2,CO2 and NH3

Sensor hub with 3 interchangeable sensor modules for measurement and local control of water quality values; with contactless power supply and data connection.

Measuring range:

Temperature: 0-50°C, resolution 0.1°.
O2 (optical): 0 - 200% saturation, resolution 0.1 mg
CO2 (optical):: 0 - 30 mg, resolution 0.1 mg
Ammonia (ISE): 0 - 10 mg, resolution 0.1 mg

Adaptable for fresh and salt water.
Dimension (L,W,D): 270 x 275 x 45mm
Power: 5V DC, incl. power adapter

Download PDF

Sensor-Modules

Suitable for SimuCare Sensor Hub

Modular exchangeable and freely combinable sensor modules with contactless power supply (without battery) and data connection.

Operating time, service calibration and replacement needs (defect, end-of-life) are monitored and tracked individually per sensor; adaptable for fresh and salt water; remote calibration service available optionally.

PH (electrolytic) : Measuring range from 0 - 14 pH, resolution 0.1 pH

EC : Measuring range from 0 - 10 mS/cm, resolution 0.1 mS/cm

ORP/Redox (electrolytic) : Measuring range +/- 999 mV, resolution 1mV

O2 (optical) : Measuring range from 0 - 200% saturation, resolution 0.1 mg

CO2 (optical) : Measuring range from 0 - 30 mg, resolution 0.1 mg

Ammonia (ISE) : measuring range from 0 - 10 mg, resolution 0.1 mg

IoT-enabled and configurable via SLS Technology Admin (web) and SLS Technology Assistant (app); measurement data is automatically visualized in SLS Technology Surf (web).

Download PDF

Water sampling cabinet

Combining SimuCare, sensor modules and sampling system

BLE SimuCare modular measurement cabinet with pre-calibrated probes and continuous water sampling system.

Combinable sensor modules:

PH (electrolytic): Measuring range from 0 - 14 pH, resolution 0.1. pH
EC: Measuring range from 0 - 10 mS/cm, resolution 0.1 mS/cm
ORP/Redox (electrolytic): Measuring range +/- 999 mV, resolution 1mV.

Further sensor modules are under development - available from Q4/22:

O2 (optical): Measuring range from 0 - 200% saturation, resolution 0.1 mg
CO2 (optical): Measuring range from 0 - 50 mg, resolution 0.1 mg (tbc)
Ammonia (ISE): Measuring range from 0 - 10 mg, resolution 0.1 mg (tbc)

Dimensions: (L,W,D): 465 x 350 x 160mm Waterproof: IP67-P
Power: 220V / 5V DC, incl. power adapter

SimuCam and sensor modules are wirelessly connected to local BLE-meshed and WIFI network; IoT-enabled and configurable via SLS Technology Admin (web) and SLS Technology Assistant (app); measurement data is automatically visualized in SLS Technology Surf (web); situation reporting via SLS Technology Assistant app enables Mobile & Tablet for iOS/Android.

Download PDF